Metal Working Tools

Posts Tagged ‘Combo’

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• 9 3/4″ swing over bed & 21″ distance between centers makes this combo lathe mill an absolute bargain
• separate 3/4 hp lathe motor & 1/2 hp Mill Motor
• 1″ spindle Bore,8-40TPI, 140-1800 lathe speeds
• MT#4 Spindle Taper on lathe, MT#3 spindle taper on mill
• cross slide travel 4 1/4″,compound travel 2 1/4″,

Product Description
Large Gear head variable speed combo lathe mill with 9 3/4″ swing over bed & 21″ distance between centers is a small but powerful machine gear driven allows for quick change of speeds eliminating down time, 1″ spindle Bore, MT#3 Mill spindle taper, 4 1/4″ cross travel, 8-40TPI, spindle to table 9 1/2″ Headstock vertical travel 8″

Bolton Tools 10″ X 21″ Gear Head Combo Lathe with Variable Speed Mill/drill, 110 Volt Single Phase Seperate Lathe & Mill Motors 1″ Spindle Bore,110 or 220 Set up Ships with Standard Acessories and Full 1 Year Manufacturers Warrantty. Excellent Value.

• 9 3/4″ swing over bed & 21″ distance between centers makes this combo lathe mill an absolute bargain
• separate 3/4 hp lathe motor & 1/2 hp Mill Motor
• 1″ spindle Bore,8-40TPI, 140-1800 lathe speeds
• MT#4 Spindle Taper on lathe, MT#3 spindle taper on mill
• cross slide travel 4 1/4″,compound travel 2 1/4″,

Product Description
Large Gear head variable speed combo lathe mill with 9 3/4″ swing over bed & 21″ distance between centers is a small but powerful machine gear driven allows for quick change of speeds eliminating down time, 1″ spindle Bore, MT#3 Mill spindle taper, 4 1/4″ cross travel, 8-40TPI, spindle to table 9 1/2″ Headstock vertical travel 8″

Bolton Tools 10″ X 21″ Gear Head Combo Lathe with Variable Speed Mill/drill, 110 Volt Single Phase Seperate Lathe & Mill Motors 1″ Spindle Bore,110 or 220 Set up Ships with Standard Acessories and Full 1 Year Manufacturers Warrantty. Excellent Value.

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• 9 3/4″ swing over bed & 21″ distance between centers makes this combo lathe mill an absolute bargain
• separate 3/4 hp lathe motor & 1/2 hp Mill Motor
• 1″ spindle Bore,8-40TPI, 140-1800 lathe speeds
• MT#4 Spindle Taper on lathe, MT#3 spindle taper on mill
• cross slide travel 4 1/4″,compound travel 2 1/4″,

Product Description
Large Gear head variable speed combo lathe mill with 9 3/4″ swing over bed & 21″ distance between centers is a small but powerful machine gear driven allows for quick change of speeds eliminating down time, 1″ spindle Bore, MT#3 Mill spindle taper, 4 1/4″ cross travel, 8-40TPI, spindle to table 9 1/2″ Headstock vertical travel 8″

Bolton Tools 10″ X 21″ Gear Head Combo Lathe with Variable Speed Mill/drill, 110 Volt Single Phase Seperate Lathe & Mill Motors 1″ Spindle Bore,110 or 220 Set up Ships with Standard Acessories and Full 1 Year Manufacturers Warrantty. Excellent Value.

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty