Posts Tagged ‘Bore’
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info | 
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, Standard, Tools, Variable, Volt, Warrantty, year | 
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, travel, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, travel, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, travel, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, travel, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, Standard, Tools, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, travel, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, travel, Variable, Volt, Warrantty, year |
No Comments »
Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty
- Built in milling table with T-slots, 1″ spindle bore
- Mill head has full 90 degree rotation, MT#3 Spindle Taper
- 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
- 9 mill speeds from 400-2500,360 degree headstock rotation
- Similiar machines don’t allow for lathe & mill function at the same time
Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.
Posted in Info |
Tags: Accessories, Bolton, Bore, Combo, Lathe, Manufacturers, Mill, Motors, Seperate, Setupships, Speed, spindle, spindle speeds, Standard, t slots, thread pitch, Tools, travel, Variable, Volt, Warrantty, year |
No Comments »
