Metal Working Tools

Posts Tagged ‘Accessories’

Dremel tool accessories are vast, including metal cutting tools, metal grinding tools and router bits, but also flex shaft attachments, which make smaller projects easier to execute. Learn about the various accessories for Dremel tools with advice from a jewelry maker and gemologist in this free video on tools. Expert: Chuck Koehler Contact: www.chuckkoehler.com/Services.htm Bio: Chuck Koeler is a bench jeweler and gemologist in Nashville, Tenn. Filmmaker: Dimitri LaBarge

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

• Built in milling table with T-slots, 1″ spindle bore
• Mill head has full 90 degree rotation, MT#3 Spindle Taper
• 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
• 9 mill speeds from 400-2500,360 degree headstock rotation
• Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty