Metal Working Tools Great info on Metal Working Tools 2011-08-04T23:16:37Z http://metalworkingtools.org/blog/feed/atom/ WordPress Admin <![CDATA[24 Pc Dapping Punches & Steel Block Set Anvil Dome Tool]]> http://metalworkingtools.org/blog/24-pc-dapping-punches-steel-block-set-anvil-dome-tool-19/ 2011-08-04T23:16:37Z 2011-08-04T23:16:37Z

Product Description
24 Dapping Punches & Block Great for Metalsmiths, Metal Working & Shaping, Forming & Chasing Metal24 Steel Dapping Punches. This is a new set of 24 steel dapping punches. Used for shaping, forming and chasing metal in dapping blocks. Made from tool steel and hardened to 50 Rc on both hit and work ends. Their unique tempering method leaves the shank of the punch with a mill hardness of 32 Rc to 36 Rc. This allows the handle to absorb the shock and prevent crystallization of the metal, which enhances the performance and life of the tool. Comes with wood stand. These punches measure from approximately 2 to 25.12 mm (0.07″ to 0.98″) Steel Dapping Block. This is a new steel dapping block. The depressions have a smooth finish that are great for shaping metal. Made from high carbon tool steel with a Rockwell hardness of 45 HRC. The half spheres and half cylinders are precision machined and hardened to perfection. Great for shaping and forming metals and waxes. Has 4 half spheres on one side and 11 on the other side that measure approximately 1.78, 3.78, 4.10, 6.92, 7.61, 10.31, 12.50, 14.60, 15.58, 16.46 and 18.73 mm (0.07″, 0.15″, 0.16″, 0.27″, 0.3″, 0.4″, 0.49″, 0.57″, 0.61″, 0.65″ and 0.74″). Has 6 half cylinders that measure approximately 6.35, 7.62, 9.39, 12.44, 16.25 and 19.05 mm (0.25″, 0.3″, 0.37″, 0.49″, 0.64″ and 0.75″). Has two 90 angles that measure approximately 3.55 and 4.57 mm (0.14″ and 0.018″). The block measures approximately 2 1/2″ x 2″ x 3/4″ (63.5 x 51 x 19 mm)We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

24 Pc Dapping Punches & Steel Block Set Anvil Dome Tool

]]> 0 Admin <![CDATA[24 Pc Dapping Punches & Steel Block Set Anvil Dome Tool]]> http://metalworkingtools.org/blog/24-pc-dapping-punches-steel-block-set-anvil-dome-tool-19/ 2011-08-04T23:16:37Z 2011-08-04T23:16:37Z

Product Description
24 Dapping Punches & Block Great for Metalsmiths, Metal Working & Shaping, Forming & Chasing Metal24 Steel Dapping Punches. This is a new set of 24 steel dapping punches. Used for shaping, forming and chasing metal in dapping blocks. Made from tool steel and hardened to 50 Rc on both hit and work ends. Their unique tempering method leaves the shank of the punch with a mill hardness of 32 Rc to 36 Rc. This allows the handle to absorb the shock and prevent crystallization of the metal, which enhances the performance and life of the tool. Comes with wood stand. These punches measure from approximately 2 to 25.12 mm (0.07″ to 0.98″) Steel Dapping Block. This is a new steel dapping block. The depressions have a smooth finish that are great for shaping metal. Made from high carbon tool steel with a Rockwell hardness of 45 HRC. The half spheres and half cylinders are precision machined and hardened to perfection. Great for shaping and forming metals and waxes. Has 4 half spheres on one side and 11 on the other side that measure approximately 1.78, 3.78, 4.10, 6.92, 7.61, 10.31, 12.50, 14.60, 15.58, 16.46 and 18.73 mm (0.07″, 0.15″, 0.16″, 0.27″, 0.3″, 0.4″, 0.49″, 0.57″, 0.61″, 0.65″ and 0.74″). Has 6 half cylinders that measure approximately 6.35, 7.62, 9.39, 12.44, 16.25 and 19.05 mm (0.25″, 0.3″, 0.37″, 0.49″, 0.64″ and 0.75″). Has two 90 angles that measure approximately 3.55 and 4.57 mm (0.14″ and 0.018″). The block measures approximately 2 1/2″ x 2″ x 3/4″ (63.5 x 51 x 19 mm)We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

24 Pc Dapping Punches & Steel Block Set Anvil Dome Tool

]]> 0 Admin <![CDATA[24 Pc Dapping Punches & Steel Block Set Anvil Dome Tool]]> http://metalworkingtools.org/blog/24-pc-dapping-punches-steel-block-set-anvil-dome-tool-19/ 2011-08-04T23:16:37Z 2011-08-04T23:16:37Z

Product Description
24 Dapping Punches & Block Great for Metalsmiths, Metal Working & Shaping, Forming & Chasing Metal24 Steel Dapping Punches. This is a new set of 24 steel dapping punches. Used for shaping, forming and chasing metal in dapping blocks. Made from tool steel and hardened to 50 Rc on both hit and work ends. Their unique tempering method leaves the shank of the punch with a mill hardness of 32 Rc to 36 Rc. This allows the handle to absorb the shock and prevent crystallization of the metal, which enhances the performance and life of the tool. Comes with wood stand. These punches measure from approximately 2 to 25.12 mm (0.07″ to 0.98″) Steel Dapping Block. This is a new steel dapping block. The depressions have a smooth finish that are great for shaping metal. Made from high carbon tool steel with a Rockwell hardness of 45 HRC. The half spheres and half cylinders are precision machined and hardened to perfection. Great for shaping and forming metals and waxes. Has 4 half spheres on one side and 11 on the other side that measure approximately 1.78, 3.78, 4.10, 6.92, 7.61, 10.31, 12.50, 14.60, 15.58, 16.46 and 18.73 mm (0.07″, 0.15″, 0.16″, 0.27″, 0.3″, 0.4″, 0.49″, 0.57″, 0.61″, 0.65″ and 0.74″). Has 6 half cylinders that measure approximately 6.35, 7.62, 9.39, 12.44, 16.25 and 19.05 mm (0.25″, 0.3″, 0.37″, 0.49″, 0.64″ and 0.75″). Has two 90 angles that measure approximately 3.55 and 4.57 mm (0.14″ and 0.018″). The block measures approximately 2 1/2″ x 2″ x 3/4″ (63.5 x 51 x 19 mm)We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.

24 Pc Dapping Punches & Steel Block Set Anvil Dome Tool

]]> 0 Admin <![CDATA[Lathe Stand for Bolton Lathe model# At-520,At-250 & CQ9325A,Two Keyed Storage Areas, Oil Plate & Stand Top]]> http://metalworkingtools.org/blog/lathe-stand-for-bolton-lathe-model-at-520at-250-cq9325atwo-keyed-storage-areas-oil-plate-stand-top-2/ 2011-08-03T07:04:16Z 2011-08-03T07:04:14Z

  • Lathe Stand for Bolton Lathe model# At-520,At-250 & CQ9325A,Two Keyed Storage Areas, Oil Plate & Stand Top

Product Description
Lathe Stand for Bolton Lathe model# At-520,At-250 & CQ9325A,Two Keyed Storage Areas, Oil Plate & Stand Top

Lathe Stand for Bolton Lathe model# At-520,At-250 & CQ9325A,Two Keyed Storage Areas, Oil Plate & Stand Top

]]> 0 Admin <![CDATA[20 Round Hole Bezel Punch & Block Metalworking Tools]]> http://metalworkingtools.org/blog/20-round-hole-bezel-punch-block-metalworking-tools-29/ 2011-08-02T10:58:28Z 2011-08-02T10:58:25Z

Product Description
Bezel Block & Punch Great For Metalsmiths & Metal Working. This is a new 17 degree round bezel block and punch. Polished hardened steel punch is used for forming tapered bezels. A single punch fits all depressions. Made in Italy. The block is case hardened and has highly polished, tapered holes. Has 20 holes that range in size from 5 to 20 mm (3/16″ to 13/16″). The block measures approximately 5 3/8″ x 4 11/16″ (137 x 118.6 mm).

20 Round Hole Bezel Punch & Block Metalworking Tools

]]> 0 Admin <![CDATA[Dremel Tools & Accessories : About Dremel Tool Accessories]]> http://metalworkingtools.org/blog/dremel-tools-accessories-about-dremel-tool-accessories-2/ 2011-07-31T00:04:31Z 2011-07-31T00:04:28Z
Dremel tool accessories are vast, including metal cutting tools, metal grinding tools and router bits, but also flex shaft attachments, which make smaller projects easier to execute. Learn about the various accessories for Dremel tools with advice from a jewelry maker and gemologist in this free video on tools. Expert: Chuck Koehler Contact: www.chuckkoehler.com/Services.htm Bio: Chuck Koeler is a bench jeweler and gemologist in Nashville, Tenn. Filmmaker: Dimitri LaBarge ]]> 3 Admin <![CDATA[Shain TC – 11 Metal Working Tool Storage Cabinet]]> http://metalworkingtools.org/blog/shain-tc-11-metal-working-tool-storage-cabinet/ 2011-07-30T03:00:19Z 2011-07-30T03:00:14Z

Product Description
Shain’s Metalworking Tool Storage Cabinet is constructed of solid maple and maple veneer. The interior on the upper half, including the doors, is lined with 1/4″ pegboard. The lower half has one fixed and two adjustable 1″ plywood shelves. Both sets of doors include locks. Three sizes of totes are also available and sold separately.

Shain TC – 11 Metal Working Tool Storage Cabinet

]]> 0 Admin <![CDATA[Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty]]> http://metalworkingtools.org/blog/bolton-tools-12-x-30-variable-speed-combo-lathe-mill-seperate-34-hp-lathe-mill-motors-1-spindle-bore-110-or-220-volt-setupships-with-standard-accessories-and-1-year-manufacturers-war-37/ 2011-07-28T11:32:19Z 2011-07-28T11:32:19Z

  • Built in milling table with T-slots, 1″ spindle bore
  • Mill head has full 90 degree rotation, MT#3 Spindle Taper
  • 6 lathe speeds from 160-1600 RPM, Thread ranges from 11-40 TPI & 0.5-3.0 mm
  • 9 mill speeds from 400-2500,360 degree headstock rotation
  • Similiar machines don’t allow for lathe & mill function at the same time

Product Description
29-1/2″ distance between centers 12″ swing over bed, 6 3/4″ swing over table, 8 1/2″ cross slide travel , Mill spindle to table 12 2/3″ Dial Calibration on Crossfeed: 0.002″. Dial Calibration on Leadscrew: 0.002″ Headstock Taper: MT4#. Thread pitch on processing: 11-40 1/n”. Thread kinds on processing: 20 Tailstock Taper: MT3#. X-Axis Working Travel: 14″. Y-Axis Working Travel: 8-1/2″. 360 degree mill head rotation 3 1/4 Head Travel, Spindle Center to Support Column 2-1/8″,Spindle to Table Distance 9-1/2″-12-3/5″Spindle Speeds: 9(315-2000RPM)Spindle Taper MT3#, X-Axis Working Travel 12-1/16″. Y-Axis Working Travel 8-1/2″. 3/4hp seperate lathe & mill motor 110 or 220 set up, ships with standard accessories and full 1 year manufacturers warrantty.

Bolton Tools 12″ X 30″ Variable Speed Combo Lathe Mill, Seperate 3/4 Hp Lathe & Mill Motors, 1″ Spindle Bore , 110 or 220 Volt Setup,ships with Standard Accessories and 1 Year Manufacturers Warrantty

]]> 0 Admin <![CDATA[Home Metal-Shop Tips 101: 6 Easy Ways How To Cut Metal]]> http://metalworkingtools.org/blog/home-metal-shop-tips-101-6-easy-ways-how-to-cut-metal/ 2011-07-27T20:18:56Z 2011-07-27T20:18:04Z
Watch as Mitchell Dillman, “the Online carpenter” at logfurniturehowto.com ,demonstrates 6 easy ways how to cut metal in your Home Metal-Shop. In this video Mitchell covers these 6 metal cutting tools 1. Angle Grinder 2. Abrasive Cut-Off Saw 3. Metal Cutting Band-Saw 4. Tin Snips 5. Electric Metal Shears 6. Oxy-Acetylene Torch And remember, it doesn’t matter what you are cutting, your eyes are one of the most important tools you have. ALWAYS WEAR EYE PROTECTION! Now, click “Subscribe” and Go To: logfurniturehowto.com ]]> 2 Admin <![CDATA[Metal Working: Make Your Own DIY EDM Machine]]> http://metalworkingtools.org/blog/metal-working-make-your-own-diy-edm-machine-3/ 2011-07-26T20:00:46Z 2011-07-26T20:00:46Z

Product Description
Most hobbyist or shop workers back away from a challenge that a prohibitively expensive steel die or mold. Not necessary anymore! Gerald Wykoff’s breakthrough CD-ROM features a comprehensive tech manual on Electrical Discharge Machining, plus complete DIY plans for a small, effective EDmm (mm stands for “Mighty Mite”) that enables hobbyist or bench worker to cheaply make expensive steel 3D dies.

Metal Working: Make Your Own DIY EDM Machine

]]> 0